#STAINLESS STEEL PAINT BEFORE AND AFTER PROFESSIONAL#

Which Paint to Useīefore you start painting, there are a couple of options for enamel. Be sure to follow product directions for dry time and apply a second coat. If you want to do what the pros do, use an airless paint sprayer, build a temporary spray booth, and spray the primer.

Work in small areas to keep a ‘wet edge.’ This will lessen the possibility of lap marks. Apply one coat, and allow to dry for the recommended amount of time – usually 2-4 hours.

Apply in long strokes w light pressure to minimize brush strokes.

The low nap of the roller and the soft bristles of the brush will leave you with a smooth prime coat.

Then apply primer to the large flat areas with the mini roller.

Start applying primer with the brush: edges, nooks, crannies, and areas hard to fit a roller into.

Purchase a soft-bristled nylon brush, such as Purdy Nylox, and a low-nap mini roller (Purdy 4.5″ mini roller frame and a Purdy ¼” White Dove cover)-and you’re set to prime.

There are two methods for applying the primer and paint to your appliances: brush/roll or spray. Note: Cover the fridge and freezer openings with plastic to keep them dust-free. You can even remove the door(s) and lay them flat to paint.

Remove handles, seals, and badges, but if you cannot get them off, mask them off with high-grade painter’s tape, such as FrogTape 1.5″ Blue Commercial tape.

This will leave the surface squeaky clean and ready for the remaining prep and primer.

Then, tack rag the surfaces with a microfiber cloth dampened with water.

Vacuum the surfaces to remove any particles with a shop vac and brush attachment.

Sand all metal and plastic surfaces with 180-grit paper to give the existing finish some “tooth.”.

Clean the appliance surface to remove any dirt or grime.

Time spent on prep will determine whether your newly painted appliances will fail embarrassingly or last a lifetime. You’re probably tired of people telling you that “prep is everything.” Well, it is. Select the DTM primer of your choice, such as Sherwin Williams DTM Acrylic Primer, and you’re ready for application. They are tailor-made for coating bare and previously coated metal surfaces.

#STAINLESS STEEL PAINT BEFORE AND AFTER PROFESSIONAL#

You won’t normally find them on retailer’s shelves-these are coatings you’ll have to ask for specifically at professional paint stores. Pros usually use DTM coatings for industrial purposes. Want to use what the professionals use? It’s called Direct To Metal (DTM). (Examples are Insl-X Stix, Sherwin Williams Extreme Bond, and Zinsser Extreme Adhesion Primer). The DIY choice would be to use one of these, which are readily available at home centers and paint stores. This can still be used but comes with a strong and unpleasant odor.Ī whole suite of water-based bonding primers can stick to tile, metal, and even glass. The old-school way of doing this was with oil primer. Since you’re not looking to block any stains, select a primer specifically made to bond to metal surfaces. Primer’s purpose is to block stains and bond to surfaces. This is a perfect candidate for paint! Best Types of Paint and Primer to Buy There is no use in buying a new refrigerator to have a color change. Your new range, dishwasher, and microwave are white. The existing refrigerator is only a few years old, but it’s black. Why Paint Appliances?īecause appliances are expensive! Scenario: you’re doing a kitchen remodel. Painting your appliances can be an easy one-day project, but one that can go wrong if you overlook a few simple things.

Stainless steel paint before and after